Microscope Micrometers

Item No.: YMMT-4128

These microscope micrometers are Instruments to measure the length of microorganisms or other tiny objects. Microscope micrometers are classified into eyepiece & objective micrometers.

Product parameters
Product Name:	Microscope Micrometers
Model Number:	MMT
Brand:	FOOD EYES
Minimum Order Quantity:	1 microscope eyepiece micrometer or objective micrometer.
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	1000 microscope eyepiece micrometers or objective micrometers per month
Place of Origin:	China

INQUIRY

Description

These microscope micrometers are measuring Instruments which are used to measure the length of microorganisms, cells, or other tiny objects. They must be placed in a microscope for measurement. Microscope micrometers are classified into eyepiece micrometers and objective micrometers. These microscope micrometers are commonly used testing equipments and Instruments in the food industry and microbiological research fields.

The eyepiece micrometer: is a circular piece of glass which is placed in the eyepiece of the microscope. As shown in the picture of the eyepiece micrometer of microscope, the center is engraved with a precise scale. Usually divide 5mm into 50 grids, and the actual grid is equal to 100μm. The size of the scale changes with the magnification of the eyepiece and objective used. It must be calibrated with the objective micrometer before using.
Picture of the eyepiece micrometer of microscope

Picture of the eyepiece micrometer of microscope

The objective micrometer: is called the stage micrometer. It is a special glass slide that is placed on the stage of microscope. As shown in the microscope objective micrometer picture below, there is a small circle in the center. The circle is engraved with a scale, and the line of 1 mm in length is divided equally into 100 small cells, and each small cell is equal to 10μm. The lower part of the figure, below C1, is an enlarged view of the scale inside the circle. The scale inside the circle is the standard length which is used to calibrate the eyepiece micrometer.
Picture of microscope objective micrometer

Picture of microscope objective micrometer

Parameters of Microscope Micrometer
* Parameters of microscope eyepiece micrometer
(1) Lens diameter: There are 10 types, respectively φ20.4mm, φ21mm, φ22mm, φ23mm, φ24mm, φ25mm, φ26mm, φ27mm, φ28mm, φ29mm.
(2) Lens thickness: 1.5mm
(3) Ruler: As shown on the right, the ruler consists of two rulers, vertical and horizontal. Form a "cross shape." Each ruler has 100 scales of which each value is 0.1 mm, with a total length of 10 mm, and the lines extend to the edge of the slide.
(4) Material: It is made of glass with high transmittance by laser engraving.

* Parameters of microscope objective micrometer
(1) The microscope objective micrometer is a combined micrometer with three sets of scales. As shown in the figure below, from left to right, the first pattern is a tick mark of 10 mm total length, divided into 100 equal parts, each aliquot is 0.1mm. In the middle is the pattern of the C1 type micrometer that we usually use, 0.01mm per scale. The third pattern has a total length of 5 mm and is divided into 100 equal parts, and each aliquot is 0.05mm. The combined micrometer sets 0.1mm and 0.01mm and 0.05mm in one, it´s convenient and practical.
(2) Lens size (length × width × thickness): 75mm×25mm×1mm
(3) Graphics accuracy: 1μm
(4) Material: It is made of glass with high transmittance by laser engraving.

Picture of microscope objective micrometer 2

Picture of microscope objective micrometer 2

They must be calibrated when using the microscope micrometer for the first time. Please refer to "Calibration Method of Length of Microscope Micrometers" for the calibration method.

-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. Food Commercial Sterility Testing and Equipment: This article introduces methods and equipment for commercial sterility testing to meet FDA requirements.
2. LP-5 Biological Microscope: Uses monocular observation to observe extremely fine microorganisms and has a simple structure.
3. LP-135 General Biological Microscope: Uses binocular observation to observe extremely fine microorganisms.
4. LP-32 Biological Microscope: Has binoculars and a photo lens, which can observe and take pictures of extremely fine microorganisms.
5. XD-1 Inverted Biological Microscope: Can directly observe and photograph the live microorganisms in the petri dish.
6. XD-3 Inverted Biological Microscope: Can directly observe and photograph the live microorganisms in the petri dish.
7. XD-3PMC Inverted Biological Microscope: Can be configured with a polarized modulation phase contrast viewing system. The XD-3PMC inverted biological microscope can directly observe and photograph the live microorganisms in the petri dish.
8. Microscope Slide and Coverslips: Are placed on the microscope stage to facilitate the observation of microorganisms.
9. PSA Biochemical Incubators for Laboratory: Are used to place microbial samples with accurate temperature control. There is a transparent thermal insulation vacuum tempered glass window on the door.
10. PSB Biochemical Incubators for Laboratory: Have cooling and heating equipment, accurate temperature control, sealed doors and glass doors.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the equipment performances and parameters required by the customer are beyond the scope of this introduction, please ask for it, we can customize it specifically.
•The Product descriptions may be modified at any time without notice.
•The final performance and parameters of the product are determined by the contract signed by the customer at the time of order.
-------------------------------------------